The Orlando Cot – Charcoal is a bold, modern cot for your new baby. With a deep, rich charcoal colourway this cot will be the centrepiece of your nursery. This gender-neutral design is wonderfully modern and features rounded, curved end panels for a chic style you’ll love.
At 100cm high x 135cm long, this cot is the perfect height for everyday use. The four fixed sides are safe and secure, with good airflow and visibility through the slatted sides (super handy for checking on your baby). The adjustable base has two settings, including a newborn setting, so you can use this charcoal cot from birth onwards.
All paints and finishes used are non-toxic and safe for your baby and this cot is approved to Australian and New Zealand Standards. If you love this style, be sure to check out the rest of the Orlando range for matching nursery furniture and options to convert your cot into a junior bed with our smartly designed toddler conversion panels. Statement nursery style is easy with the Orlando Cot - Charcoal.
|Frame Type||Poplar wood|
|Additional Materials||MDF base and curved side panels|
|Assembled Height (cm)||100|
|Assembled Width (cm)||135|
|Assembled Depth (cm)||75|
|Extra Dimensions||Leg height (floor to under mattress base) - 19cm high. Distance between legs - 104cm wide. Cot base dimensions - 130cm wide x 71cm deep. Base (at lowest setting) to top of cot - 62.5cm high|
|Assembly Instructions||Orlando Cot Assembly Instructions|
|NZ Safety Standard||AS/NZS 2172:2003|
|NZ Safety Standard||As per AS/NZS 2172:2003 the distance between the rails/ slats on our cots meet the minimum requirement of 50mm|
|Special Notes||This cot had been manufactured for use with a mattress which measures 130cm long x 69cm wide and 10cm thick. The width and length are specific as it’s important the gaps between the mattress, sides and ends of the cot will not exceed 4cm.|
|Special Notes||The thickness of the mattress has been specified to ensure that when the mattress is in place and the cot base is in the lower position, that the depth of the cot is no less than 50cm to minimise the risk of a child climbing or falling out of the cot|
|Special Notes||To prevent falls, the mattress base of this cot should be adjusted to the lowest position before the child can sit up.|
|Special Notes||If ordering the Vale Cot Mattress, please note, this mattress has been vacuum packed by specialised machinery. Once opened, the mattress expands and cannot be put back into its original packaging. For this reason it cannot be returned.|
|Carton Dimensions||Carton A (16kg) 92cm x 85cm x 20cm, Carton B (11kg) 137cm x 75cm x 11cm|
|NZ Safety Standard||The paint finish on this product complies with safety standards AS/NZS 8124.3:2003|
Mocka offers a 365 day warranty on all of our products*. This warranty covers all manufacturing faults or defects. It does not cover wear, tear, or damage caused by use, accident, or failure to follow care instructions. The warranty is valid for 365 days from the date of the order and is available to the original purchaser of the product only.