Very pleased with my purchase of the Darby cot. Easy to assemble and looks great in the room, the design makes it easy to check on bubba sleeping. Light enough to move around if needed. Only problem was some of the instructions were missing - I had to google how to remove the plastic screws on the newborn setting.
Good product and was as ordered
Very easy purchase. Payment process quick and easy
Quality for price exactly as described great sturdy cot
Great value for money. very sturdy design
| Frame Type | Pine |
| Additional Materials | MDF Base |
| Assembled Width (cm) | 134 |
| Assembled Height (cm) | 85 |
| Assembled Depth (cm) | 73 |
| Extra Dimensions | Lower mattress base to top of cot - 62cm . Upper mattress base to top of cot - 42cm. Inside area for mattress - 130cm wide x 69cm deep. Floor to under cot side - 19cm high. Between bars is 58mm |
| NZ Safety Standard | AS/NZS 2172:2003 |
| Finish | Sealer and matte |
| Weight Limit - Total (kg) | 30 |
| Assembly Instructions | Darby Cot Assembly Instructions |
| Available Colours | Natural/White |
| Carton Dimensions | Carton A (17kg) 82cm x 15cm x 136cm |
| Special Notes | This cot had been manufactured for use with a mattress which measures 130cm long x 69cm wide and 10cm thick. The width and length are specific as it’s important the gaps between the mattress, sides and ends of the cot will not exceed 4cm. |
| Special Notes | The thickness of the mattress has been specified to ensure that the depth of the cot is greater than 50cm with the mattress base in the lower position to minimise the risk of a child climbing or falling out of the cot. |
| Special Notes | To prevent falls, the mattress base of this cot should be adjusted to the lowest position before the child can sit up. |
| Special Notes | If ordering the Vale Cot Mattress, please note, this mattress has been vacuum packed by specialised machinery. Once opened, the mattress expands and cannot be put back into its original packaging. For this reason it cannot be returned. |
| NZ Safety Standard | As per AS/NZS 2172:2003 the distance between the rails/ slats on our cots meet the minimum requirement of 50mm |
