5f5894d4e4b0c3d5c65734ff
Absolutely stunning natural pine wood cot. Easy to assemble. Plenty of comfy room for baby to stretch out. Good height level with my bed. Love it. Thankyou
Absolutely stunning natural pine wood cot. Easy to assemble. Plenty of comfy room for baby to stretch out. Good height level with my bed. Love it. Thankyou
Good basic cot. Easy to assemble and sturdy.
Great service exceptional service will b purchasing again
Assembled Height (cm) | 82 |
Assembled Depth (cm) | 74 |
Assembled Width (cm) | 134 |
Frame Type | New Zealand Pine |
Additional Materials | MDF end and base (the sides of the Cot and frame of the end panels are made from pine and the base and recessed panel on the ends are made from MDF) |
Finish | Matte |
NZ Safety Standard | NZS 2172:2003 |
AU Safety Standard | AS 2172 |
Available Colours | Natural |
Assembly Required | Yes |
Weight Limit - Total (kg) | 30 |
Extra Dimensions | Lower mattress base to top of cot - 63cm. Upper mattress base to top of cot - 41cm. |
Assembly Instructions | Mocka Aspiring Cot Assembly Instructions |
Carton Dimensions | Carton A (20kg) 16cm x 135cm x 83cm |
Special Notes | This cot had been manufactured for use with a mattress which measures 130cm long x 69cm wide and 10cm thick. The width and length are specific as it’s important the gaps between the mattress, sides and ends of the cot will not exceed 4cm. |
Special Notes | The thickness of the mattress has been specified to ensure that the depth of the cot is greater than 50cm with the mattress base in the lower position to minimise the risk of a child climbing or falling out of the cot. |
Special Notes | To prevent falls, the mattress base of this cot should be adjusted to the lowest position before the child can sit up. |
Special Notes | If ordering the Vale Cot Mattress, please note, this mattress has been vacuum packed by specialised machinery. Once opened, the mattress expands and cannot be put back into its original packaging. For this reason it cannot be returned. |
NZ Safety Standard | As per AS/NZS 2172:2003 the distance between the rails/ slats on our cots meet the minimum requirement of 50mm |