instructions were super easy to assemble the cot. I wish that it came with 2 Allen keys for the screws so that my partner and I could put it up quicker (not an issue though) There’s a small part of the wood that looked to be missed by the painters but is fine as it’s not in open view. All parts were in good condition other than the small paint missing. The colour of the cot is exactly as expected.
| Assembled Height (cm) | 85 |
| Assembled Depth (cm) | 75 |
| Assembled Width (cm) | 136 |
| Frame Type | NZ Pine and MDF |
| Finish | Matte |
| NZ Safety Standard | AS/NZS 2172:2003 |
| Available Colours | Grey/Natural |
| Assembly Required | Yes |
| Weight Limit - Total (kg) | 30 |
| Extra Dimensions | Legs - 15cm high. Lower mattress base to top of cot - 62cm. Upper mattress base to top of cot - 42cm. |
| Pantone Colours | Grey - cool grey 8U |
| Assembly Instructions | Aspen Cot Assembly Instructions |
| Carton Dimensions | Carton A (5kg) 8cm x 82cm x 77cm, Carton B (17kg) 13cm x 142cm x 85cm |
| Special Notes | This cot had been manufactured for use with a mattress which measures 130cm long x 69cm wide and 10cm thick. The width and length are specific as it’s important the gaps between the mattress, sides and ends of the cot will not exceed 4cm. |
| Special Notes | The thickness of the mattress has been specified to ensure that the depth of the cot is greater than 50cm with the mattress base in the lower position to minimise the risk of a child climbing or falling out of the cot. |
| Special Notes | To prevent falls, the mattress base of this cot should be adjusted to the lowest position before the child can sit up. |
| Special Notes | If ordering the Vale Cot Mattress, please note, this mattress has been vacuum packed by specialised machinery. Once opened, the mattress expands and cannot be put back into its original packaging. For this reason it cannot be returned. |
| Special Notes | Please note the ends of the mattress base are natural and differ from some images shown on the website. |
| NZ Safety Standard | As per AS/NZS 2172:2003 the distance between the rails/ slats on our cots meet the minimum requirement of 50mm |
