Excellent quality very sturdy and stylish.
| Frame Type | MDF (base and rail sides) |
| Additional Materials | Pine ends |
| Finish | Frame, base and rails - lacquer matte paint. Driftwood look ends - wood-look paper laminate |
| Assembled Width (cm) | 135 |
| Assembled Height (cm) | 94 |
| Assembled Depth (cm) | 75 |
| Extra Dimensions | Lower mattress base to top of cot is 62cm. Upper mattress base to top of cot is 44cm. |
| Weight Limit - Total (kg) | 30 |
| Available Colours | White/Driftwood |
| Special Notes | This cot had been manufactured for use with a mattress which measures 130cm long x 69cm wide and 10cm thick. The width and length are specific as it’s important the gaps between the mattress, sides and ends of the cot will not exceed 4cm. |
| Special Notes | The thickness of the mattress has been specified to ensure that the depth of the cot is greater than 50cm with the mattress base in the lower position to minimise the risk of a child climbing or falling out of the cot. |
| Special Notes | To prevent falls, the mattress base of this cot should be adjusted to the lowest position before the child can sit up. |
| Special Notes | If ordering the Vale Cot Mattress, please note, this mattress has been vacuum packed by specialised machinery. Once opened, the mattress expands and cannot be put back into its original packaging. For this reason it cannot be returned. |
| Assembly Required | Yes |
| Assembly Instructions | Mocka Amalfi Cot Assembly Instructions |
| Carton Dimensions | Carton A (19kg) 101cm x 83cm x 8cm, Carton B (21kg) 138cm x 91cm x 7cm, Carton C (7kg) 136cm x 76cm x 5cm |
| NZ Safety Standard | AS 2172:2003 |
| NZ Safety Standard | As per AS/NZS 2172:2003 the distance between the rails/ slats on our cots meet the minimum requirement of 50mm |
